Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Choi, B.; Nishida, Akemi; Shiomi, Tadahiko; Kawata, Manabu; Li, Y.
Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 7 Pages, 2021/08
In the seismic safety assessment of building structures in nuclear facilities, lumped mass models are conventionally used. However, they cannot possess the required high-accuracy evaluation of nuclear facilities, such as the local response at the equipment location in a reactor building. In this point of view, a seismic response analysis method using a three-dimensional finite element (3D FE) model is indispensable. Although, it has been reported that the analysis results obtained using 3D FE models vary greatly depending on the experience and knowledge of analysts, the quality of analysis results should be insured by developing a standard analysis method. In the Japan Atomic Energy Agency, we have developed a guideline for seismic response analysis methods that adopt 3D FE models of reactor buildings. The guideline consists of a main body, commentary, and several supplements; it also includes procedures, recommendations, points of attention, and a technical basis for conducting seismic response analysis using 3D FE models of reactor buildings. In this paper, the outline of the guideline and analysis examples based on the guideline are presented.
Ichihara, Yoshitaka*; Nakamura, Naohiro*; Moritani, Hiroshi*; Choi, B.; Nishida, Akemi
Frontiers in Built Environment (Internet), 7, p.676408_1 - 676408_14, 2021/06
The objective of this study is the improvement of response evaluations of structures, facilities and equipment in evaluation of three-dimensional seismic behavior of nuclear power plant facilities, by three-dimensional finite element method model, including separation and sliding between the soil and the basement walls. To achieve this, simulation analyses of Kashiwazaki Kariwa nuclear power plant unit 7 reactor building under the 2007 Niigataken-chuetsu-oki earthquake event were carried out. These simulation analyses consider soil-structure interaction using a three-dimensional finite element method model in which the soil and building are three-dimensionally modeled by the finite element method. It is found that basemat uplift is generated on east side of the basemat edge, and this has an important influence on the results. The importance is evidenced by the difference of local response in soil pressure characteristics beneath the edge of basemat, the soil pressure characteristics along the east side of basement wall and the maximum acceleration response at the west end of the embedded surface. Although, in this particular study, basemat uplift, separation and sliding have only a relatively small influence on the maximum acceleration response of embedded surface and the soil pressure characteristics along the basement walls and beneath the basemat, under strong earthquake motion, these influences can be significant, therefore appropriate evaluation of this effect should be considered.
Asahina, Daisuke*; Aoyagi, Kazuhei; Kim, K.*; Birkholzer, J.*; Birkholzer, J. T.*; Bolander, J. E.*
Computers and Geotechnics, 81, p.195 - 206, 2017/01
Times Cited Count：33 Percentile：82.31(Computer Science, Interdisciplinary Applications)Choi, B.; Nishida, Akemi; Shiomi, Tadahiko; Kawata, Manabu; Li, Y.
no journal, ,
no abstracts in English
